Conference Proceedings

Abbasi, Hassan

Comparative Structural Behavior of Insulated Sandwich Foam-OSB Walls and floor with Conventional Timber Stud Panels in Residential Buildings

ABDULRIDHA, ALAA

Performance of Concrete-Filled Light Gauge Steel Composite Columns: Pilot Study

Abolghasem, Alireza

Experimental Study on the Effect of Bar Group Action on Pullout Strength of GFRP Bars Embedded in Concrete.

Abou-Zeid, Mohamed

Assessment of Accumulated Carbon Dioxide Emission in Portland Cement Concrete

Abouhussien, Ahmed

Optimization of Self-Consolidating Concrete Containing Metakaolin by Using Statistical Models

Adeeb, Samer

EFFECTS OF MATERIAL ANISOTROPY AND GEOMETRIC IMPERFECTIONS ON THE BUCKLING RESPONSE OF X100 UOE PIPES – A FINITE ELEMENT STUDY

Aghniaey, Nima

Behaviour of SCFRC Beams under Displacement Reversals

Ahmed, Abdelkader T.

FINITE ELEMENT MODELLING AND LABORATORY DETERMINATION FOR THE ELASTIC MODULUS OF GRANULAR WASTE MATERIALS

Ahmed, Ehab

Bond-Dependent Coefficient of Deformed Glass Fiber-Reinforced Polymer (GFRP) Reinforcing Bars

Akbarzadeh, Hamid

Functionally Graded Piezoelectric Sphere in Constant Magnetic Field Under Hygrothermal Loading

Alam, Shahria

Efficient debugging method development for the inclusion of hysteresis models in finite-element software S-Frame

Alan, Carter

Laboratory characterization of CIR and FDR materials

Alfarra, Abdalsattar

Behaviour of SCFRC Beams under Displacement Reversals

Ali, Ahmed

Shear Resistance of Circular Concrete Members Reinforced with FRP Bars: Code Predictions and Numerical Analysis

ALI, BOUHERAOUA

Comportement mécanique d'un sédiment de dragage de barrage

Almansour, Husham

Simplified Non-linear FE Model to Predict Staged Capacity Deterioration of RC Columns Subjected to Combined Ultimate or Seismic and Reinforcement Corrosion Loads

Alnuaim, Ahmed

3D Modeling of Piled Raft Foundation Subjected To Vertical Loading

Aoude, Hassan

Analytical modeling of SCC and SCFRC columns under axial load

AQEL, MOHAMMAD

Early Age Properties of Steam Cured High Early Strength Cement Mortars Containing Limestone

Azimi, Hossein

Experimental Study on the Effect of Bar Group Action on Pullout Strength of GFRP Bars Embedded in Concrete.

Barony, Saleh

A NEW PROPOSED TEST METHOD FOR SHEAR STRENGTH OF LEAN AND NORMAL STRENGTH CONCRETE

Bartlett, Michael

Instability of Cable-Stayed Bridge Decks

Beaulieu Michaud, Marie-Christine

Conception, construction et monitorage d'une dalle de grande dimension en béton armé de polymères renforcés de fibre (PRF)

Benmokrane, Brahim

BEHAVIOUR OF CIRCULAR CONCRETE COLUMNS INTERNALLY REINFORCED WITH CFRP BARS AND SPIRAL STIRRUPS

Bernard, Sebastien

Finite Element Modeling of Reinforced Concrete Beams with Corroded Shear Reinforcement

Boehm, Stefan

Physical and Rheological Characteristics of unaged and Aged Binders

Bouaanani, Najib

Characterization of 3D fluid-structure interaction effects in civil engineering applications

Boyd, Andrew

Microstructure and properties of concrete subject to early carbonation curing

Bruno, Feisthauer

Simulation and Influence of Early-Life Traffic Curing for Cold In-Place Recycling and Full-Depth Reclamation Materials

Chabi, Parham

Effectiveness of half-cell potential mapping in corrosion assessment of reinforcement in loaded concrete bridge decks

Chen, Lin

Life-cycle Performance and Cost Analysis of Concrete Beams designed with cross sections of Equal Durability

Chen, Zengtao

Functionally Graded Piezoelectric Sphere in Constant Magnetic Field Under Hygrothermal Loading

Cheng, Jung-June Roger

EFFECTS OF MATERIAL ANISOTROPY AND GEOMETRIC IMPERFECTIONS ON THE BUCKLING RESPONSE OF X100 UOE PIPES – A FINITE ELEMENT STUDY

Cheng, Shaohong

Identification of Concrete Fracture Parameters Using Statistical Inverse Analysis

Chouinard, Luc

Bayesian Updating and Model Validation of Bridges based on Ambient Vibration Tests

Cortes Puentes, Wilmar Leonardo

Performance of Concrete-Filled Light Gauge Steel Composite Columns: Pilot Study

D'Amours, Louis

Approche innovante dans l'établissement de transition entre deux matériaux de gélivité différente sous chaussée rigide en béton à l'aéroport international Pierre-Élliott-Trudeau de Montréal

DAMIEN, RANGEARD

Comportement mécanique d'un sédiment de dragage de barrage

Daniel, Perraton

Laboratory characterization of CIR and FDR materials

David, Lacroix

Simulation and Influence of Early-Life Traffic Curing for Cold In-Place Recycling and Full-Depth Reclamation Materials

Doudak, Ghasan

BEHAVIOUR OF TYPICAL LIGHT-FRAME WOOD STUD WALLS SUBJECTED TO BLAST LOADING

Driver, Robert

Extended Shear Tab Connections Under Combined Axial and Shear Loading

Dulude, Christian

Testing of Hybrid Reinforced Curb-Deck Connections of Post-and-Beam Bridge Barriers

El Aghoury, Ihab

TOWARDS A CORROSION-FATIGUE STRAIN-LIFE MODEL FOR STEEL BEAMS IN CORROSIVE ENVIRONMENTS

El Aghoury, Mohamed

TOWARDS A CORROSION-FATIGUE STRAIN-LIFE MODEL FOR STEEL BEAMS IN CORROSIVE ENVIRONMENTS

El Naggar, Hany

3D Modeling of Piled Raft Foundation Subjected To Vertical Loading

El Naggar , Hesham

3D Modeling of Piled Raft Foundation Subjected To Vertical Loading

Elsanabary, Mohamed

FINITE ELEMENT MODELLING AND LABORATORY DETERMINATION FOR THE ELASTIC MODULUS OF GRANULAR WASTE MATERIALS

Fahmy, Ezzat

Assessment of Accumulated Carbon Dioxide Emission in Portland Cement Concrete

Fam, Amir

Full Scale Testing of GFRP Reinforced Concrete Guideway Beams for Elevated Transit Systems

Faouzi, Ghrib

Identification of Concrete Fracture Parameters Using Statistical Inverse Analysis

Feldman, Lisa

Mechanical Properties and Bond Behaviour of Ransome Bars

Ferguson, James

EFFECTS OF MATERIAL ANISOTROPY AND GEOMETRIC IMPERFECTIONS ON THE BUCKLING RESPONSE OF X100 UOE PIPES – A FINITE ELEMENT STUDY

Feyissa, Berhanu Abesha

Physical and Rheological Characteristics of unaged and Aged Binders

Fortier, Alexandre

Testing of Hybrid Reinforced Curb-Deck Connections of Post-and-Beam Bridge Barriers

Galal, Khaled

TOWARDS A CORROSION-FATIGUE STRAIN-LIFE MODEL FOR STEEL BEAMS IN CORROSIVE ENVIRONMENTS

Gazarian-Pagé, Carl

Characterization of 3D fluid-structure interaction effects in civil engineering applications

Gelani, Adel

A NEW PROPOSED TEST METHOD FOR SHEAR STRENGTH OF LEAN AND NORMAL STRENGTH CONCRETE

Ghods, Pouria

Effectiveness of half-cell potential mapping in corrosion assessment of reinforcement in loaded concrete bridge decks

Green, Mark

Full Scale Testing of GFRP Reinforced Concrete Guideway Beams for Elevated Transit Systems

Haque, A.B.M. Rafiqul

Efficient debugging method development for the inclusion of hysteresis models in finite-element software S-Frame

Hassan, Assem

Effect of Mix Design on the Fresh Properties of SCC Containing Metakaolin

Hassan, Mohamed

Preliminary Investigation on Punching-Shear Strength of Flat Slabs with FRP Flexural and Shear Reinforcement

He, Zhen

Microstructure and properties of concrete subject to early carbonation curing

Hjaji, Mohammed

Harmonic Response of Thin-walled Members under Harmonic Forces I. Analytical Solution

Hossack, Ashlee

Durability of Concrete produced with Portland Limestone Cement

Hossain, Khandaker

BEHAVIOUR OF GREEN ENGINEERED CEMENTITIOUS COMPOSITES UNDER FATIGUE LOADING

Ibrahim, Omar

ESTIMATION OF RESIDUAL STRESSES IN THICK STEEL PLATES DUE TO WELDING THROUGH FINITE ELEMENT SIMULATION

Isgor, O. Burkan

Effectiveness of half-cell potential mapping in corrosion assessment of reinforcement in loaded concrete bridge decks

Islam, Riyad

Evaluation of Stiffness to Predict Fatigue Life of Hot-Mix Asphalt – A Canadian Case Study

Issani, Rizwan

High performance ECC floor slabs in coupled shear wall structures

Jerry, Sokolowski

The HAZ in Aluminum Welding Revisited

Jimenez, Gabriel

Lateral-Torsional Buckling of Steel Web-Tapered Beam-Columns: Further Analytical Studies

Kainat, Muntaseer

EFFECTS OF MATERIAL ANISOTROPY AND GEOMETRIC IMPERFECTIONS ON THE BUCKLING RESPONSE OF X100 UOE PIPES – A FINITE ELEMENT STUDY

Kandasamy, Seyon

Use of ternary blends containing high calcium fly ash and slag to mitigate sulphate attack

Kayes, Md

Influence of ECC mixtures on the structural performance of link slabs in bridge decks

Kazemi, Sadegh

Pull-out Resistance of Composite Connections with High Performance Concrete

Kechouane-Zahia, Zahia

L'INFLUENCE DU COMPACTAGE SUR LA PRESSION DE GONFLEMENT DE SOLS ARGILEUX EXPANSIFS INCORPORE DE CHAUX

Khoo, Heng

An experimental study of the strain rate effects on mild steel for cyclic loading

Knight, Michael

Mechanical Properties and Bond Behaviour of Ransome Bars

Kolahdoozan, Maryam

Studies on the Fresh Properties and Long Term Performance of Unshrinkable Fill Containing Reclaimed Concrete Aggregate (RCA)

Lachemi, Mohamed

BEHAVIOUR OF GREEN ENGINEERED CEMENTITIOUS COMPOSITES UNDER FATIGUE LOADING

Lacroix, Daniel

BEHAVIOUR OF TYPICAL LIGHT-FRAME WOOD STUD WALLS SUBJECTED TO BLAST LOADING

Legeron, Frederic

Consideration of Wind Direction on the Reliability of Transmission Tower Systems

Lignos, Dimitrios

ESTIMATION OF RESIDUAL STRESSES IN THICK STEEL PLATES DUE TO WELDING THROUGH FINITE ELEMENT SIMULATION

M. Mansour, Ali

A NEW PROPOSED TEST METHOD FOR SHEAR STRENGTH OF LEAN AND NORMAL STRENGTH CONCRETE

M. Mohamed, Hamdy

BEHAVIOUR OF CIRCULAR CONCRETE COLUMNS INTERNALLY REINFORCED WITH CFRP BARS AND SPIRAL STIRRUPS

Mahmoudi, Seyyed Nima

Bayesian Updating and Model Validation of Bridges based on Ambient Vibration Tests

Majeed, Muslim

Performance of Concrete-Filled Light Gauge Steel Composite Columns: Pilot Study

MAKI, TAKESHI

Behavior of cement treated sand under cyclic compressive stress

Mamaghani, Iraj

HYSTERETIC INELASTIC BEHAVIOR OF THIN STEEL PLATES

Martens, Michael

EFFECTS OF MATERIAL ANISOTROPY AND GEOMETRIC IMPERFECTIONS ON THE BUCKLING RESPONSE OF X100 UOE PIPES – A FINITE ELEMENT STUDY

Martin-Perez, Beatriz

Effectiveness of half-cell potential mapping in corrosion assessment of reinforcement in loaded concrete bridge decks

Mayo, Justin

Effect of Mix Design on the Fresh Properties of SCC Containing Metakaolin

McClure, Ghyslaine

Advanced Computational Stress Analysis of a Stranded Overhead Line Conductor under Fretting Fatigue Conditions

McNeil, Zachary

Instability of Cable-Stayed Bridge Decks

Mirzaei, Alireza

FULL-SCALE TESTING OF SHEAR TAB CONNECTIONS SUBJECTED TO COMBINED AXIAL AND SHEAR FORCES

Mobeen, Syed

Patch Delamination Effect on Stress Intensity Factor of Cracked Steel Plates Repaired with Bonded Fiber Reinforced Polymers

Moffatt, Ted

Service-Life Monitoring for the Confederation Bridge

Mohammadi, Babak

Influence of Moisture Content on Water Absorption in Concrete

Mohammadi Hosinieh, Milad

Analytical modeling of SCC and SCFRC columns under axial load

Mohammed, Amina

Simplified Non-linear FE Model to Predict Staged Capacity Deterioration of RC Columns Subjected to Combined Ultimate or Seismic and Reinforcement Corrosion Loads

Mohareb, Magdi

Harmonic Response of Thin-walled Members under Harmonic Forces I. Analytical Solution

Moreau, Rolando

Experimental Testing of Conventional HSS Slotted Tube-to-Plate Connections Loaded Under Static and Dynamic Strain Rates

Navid, Nazemi

The HAZ in Aluminum Welding Revisited

Nechnech, Amar

L'INFLUENCE DU COMPACTAGE SUR LA PRESSION DE GONFLEMENT DE SOLS ARGILEUX EXPANSIFS INCORPORE DE CHAUX

Nicolas, Bueche

Laboratory characterization of CIR and FDR materials

Nikolaidou, Violetta

FINITE ELEMENT MODELLING OF WELDING PROCEDURES IN HIGH STRENGTH W-SHAPES

Nokken, Michelle

Influence of Moisture Content on Water Absorption in Concrete

Normand, Bernie

Performance of Concrete-Filled Light Gauge Steel Composite Columns: Pilot Study

Oosterhof, Steven

Extended Shear Tab Connections Under Combined Axial and Shear Loading

OUIZA, SEKLAOUI-OUKID

Comportement mécanique d'un sédiment de dragage de barrage

Palermo, Dan

Performance of Concrete-Filled Light Gauge Steel Composite Columns: Pilot Study

Panesar, Daman

Early Age Properties of Steam Cured High Early Strength Cement Mortars Containing Limestone

Qi, Gang

Advanced Computational Stress Analysis of a Stranded Overhead Line Conductor under Fretting Fatigue Conditions

qu, wenjun

Durability design of concrete foundation in acidic soil

RAHMATIAN, ARASH

Performance of an innovative SHM system for RC flexural members under normal and adverse environmental conditions

Raoul, Jauberthie

Comportement mécanique d'un sédiment de dragage de barrage

Rezaei, Seyedeh Nasim

Consideration of Wind Direction on the Reliability of Transmission Tower Systems

Robert, Tremblay

Experimental Testing of Conventional HSS Slotted Tube-to-Plate Connections Loaded Under Static and Dynamic Strain Rates

Rogers, Colin

ESTIMATION OF RESIDUAL STRESSES IN THICK STEEL PLATES DUE TO WELDING THROUGH FINITE ELEMENT SIMULATION

Rostami, Vahid

Microstructure and properties of concrete subject to early carbonation curing

Saad, Bassam

Hydromechanical Analysis of Flexible Pavement Foundations with Excess Moisture Content

Saatcioglu, Murat

Behaviour of SCFRC Beams under Displacement Reversals

sadeghian, vahid

FORMWORKS-PLUS: IMPROVED PRE-PROCESSOR FOR VECTOR ANALYSIS SOFTWARE

Safiuddin, Md.

Evaluation of Stiffness to Predict Fatigue Life of Hot-Mix Asphalt – A Canadian Case Study

Sasibut , Siriwut

Efficient debugging method development for the inclusion of hysteresis models in finite-element software S-Frame

Sayed Ahmed, Mahmoud

EFFECT OF TEMPERATURE AND RELATIVE HUMIDITY ON CREEP DEFLECTION OF PERMANENT WOOD FOUNDATION MADE OF STRUCTURAL-INSULATED FOAM-TIMBER PANELS

Sennah, Khaled

Comparative Structural Behavior of Insulated Sandwich Foam-OSB Walls and floor with Conventional Timber Stud Panels in Residential Buildings

Shao, Yixin

Microstructure and properties of concrete subject to early carbonation curing

Shehata, Medhat

Durability Aspects of Concrete made with High Volume of Coarse Recycled Concrete Aggregate

sherir, mohamed

BEHAVIOUR OF GREEN ENGINEERED CEMENTITIOUS COMPOSITES UNDER FATIGUE LOADING

Sucic, Anto

Durability Aspects of Concrete made with High Volume of Coarse Recycled Concrete Aggregate

Taormina, Antonio

Post-Fire Axial Load Behaviour of Double Skin Composite Walls Incorporating Ultra-High Performance Concrete

TARIQ, KHAWAJA ADEEL

Behavior of cement treated sand under cyclic compressive stress

Thomas, Kristin

Extended Shear Tab Connections Under Combined Axial and Shear Loading

Thomas, Michael

Durability of Concrete produced with Portland Limestone Cement

Tighe, Susan

Evaluation of Stiffness to Predict Fatigue Life of Hot-Mix Asphalt – A Canadian Case Study

Topuzi, Dritan

Recent developments on the technology of GFRP bent bars

Tropynina, Ekaterina

Experimental Study on the Effect of Bar Group Action on Pullout Strength of GFRP Bars Embedded in Concrete.

Vecchio, Frank

FORMWORKS-PLUS: IMPROVED PRE-PROCESSOR FOR VECTOR ANALYSIS SOFTWARE

Vincent, Patrick

Characterization of Basalt Fiber-Reinforced Polymer (BFRP) Reinforcing Bars

Wafa, Polies

Identification of Concrete Fracture Parameters Using Statistical Inverse Analysis

Walker, Adam

An experimental study of the strain rate effects on mild steel for cyclic loading

Wang, Qishan

Vibration suppression and buckling control of a smart piezoelectric composite plate

Waseem, Afzal

Evaluation of pre-overlay rut depth for local calibration of MEPDG rutting model in Ontario

Weber, Andre

Recent developments on the technology of GFRP bent bars

Wen, Zhiqi

Modelling of Steel Behaviour for Monotonic and Cyclic Loading

Wootton, Nikolaus

Full Scale Testing of GFRP Reinforced Concrete Guideway Beams for Elevated Transit Systems

Xiao, Jie

Durability design of concrete foundation in acidic soil

Yuan, Arnold

Evaluation of pre-overlay rut depth for local calibration of MEPDG rutting model in Ontario

Zaki Afifi, Mohammad

BEHAVIOUR OF CIRCULAR CONCRETE COLUMNS INTERNALLY REINFORCED WITH CFRP BARS AND SPIRAL STIRRUPS

Zhu, Peng

Life-cycle Performance and Cost Analysis of Concrete Beams designed with cross sections of Equal Durability